Lightning Protection Thru Roofs, Walls and Special Purpose Parts - Series 600
To place an order pleace call or fill out this Quote Form.
Lightning Protection Concealed Air Terminals
Solid Copper or Aluminum concealed
air terminals, made in one continuous length
of air terminal and threaded section. Air terminals are
made from bare copper or aluminum rod
with highly polished finish. Rod ends
threaded standard N.C. and supplied
with two compatible nuts and washers.
Concealed points will adapt to most
bases Series 300 and Part No. 610.
|
|
|
Lightning Protection Concealed Air Terminal Base Assemblies
|
|
Bronze or Aluminum Cast concealed point
base assemblies. Positive bolt tension
cable clamping for cables or wires,
accepts one or two of any combination
of full size and/or miniature bonding wires
or cables in a parallel manner. Furnished
with washer and standard N.C. nut for
secure connections. See Part No.'s LPC601
thru LPA609 for application.
Lightning Protection Thru-Wall Connection Assemblies
| 
|
| |
Lightning Protection Thru-Roof Air Terminal Adapter Assemblies
|
|
Flashing Adapter
Flashing adapter for use in providing
weather tight seal between threaded
rod and Part No. LPP634 pipe flashing.
Diameter of 1" by 1" high. Available
in brass or aluminum with standard N.C.
internal threads. Use in conjunction
with Part No. LPP636.
|
|
|
Pipe Flashing Clamp
Pipe flashing clamp for use with Part
No. LPP634. Constructed of stainless
steel material. Adjustable to
accommodate 1" diameter as required
for flashing. Use in conjunction with
Part No. 635 series.
|
|
Series 636 LPP636 pipe flashing clamp |
Lightning Protection All THread Rod
Stainless steel all thread solid rod.
Available in lengths from a few
inches to 12" for thru-roof or wall
rods. Use of 5/16" rod is for miniature
bonding only. All threads-5/16", 3/8",
1/2", or 5/8" - N.C. standard.
|
|
Series 661 LPS661CTO 5/16" stainless steel LPS661CTO 1/2" stainless steel LPS661CTO 5/8" stainless steel LPS663CTO 5/8" stainless steel LPC661CTO 3/8" copper LPC662CTO 1/2" copper LPC663CTO 5/8" copper |
Lightning Protection Thru-Roof Assemblies
Thru-roof cable connecting assemblies for copper
to copper or aluminum to aluminum or copper
concealed system to aluminum above deck. The
top end is finished with a universal parallel cable
connection. Lower end finished with flat mount
rod and cable holder. Threaded rod is stainless
steel 1/2" housed in UV stabilized PVC tube in
either 18" or 24" lengths.
| 
|  NOTE: Identify roof manufacturer for proper EPDM pipe flashing.
| |||||||||||||||
Lightning Protection Thru-Roof Assemblies (cont.)
Thru-roof cable connecting assemblies
for copper to copper or copper concealed
system to aluminum above deck.
The top end is finished with a universal
parallel cable connection. Lower end is
finished with an option for either an 8
square inch flat surface or an additional
straight inline cable to rod coupler.
Threaded rod is 1/2" dia. stainless steel
housed in UV stabilized PVC tube in
either 18" or 24" lengths.
| 
| 
* Copper base, aluminum topNOTE: Identify roof manufacturer for proper EPDM pipe flashing. |
Welding Plate
Mild steel welding plate 1/4" x 4" x 4"
for attachment to steel columns or
beams when no holes may be made in
steel member. Steel plate to be welded
to steel column or beam. Provided with
four 1/4-20 x 3/8" screws for mounting
532 series bonding plates or 306, 307,
and 308 series air terminal bases.
| 
| Series 667 LPP667 mild steel welding plate NOTE: Similar steel welding plate can be provided for 540 series bonding plate and 340 series air terminal bases. Specify Part No. LPP667X540 to receive steel plate with the proper mounting hole pattern. Similar steel welding plate can also be provided for connecting to large diameter weldable metal piping. Use in conjunction with 551 series terminal bonding lug. Specify Part No. LPP667X551 to receive steel plate with proper mounting hole pattern. |
Lightning Protection Strap Type Air Terminal or Cable Holder
Copper or Aluminum Strap type point
or cable holder. Made of heavy tinned
copper or bare aluminum strap formed
to draw tight under bolt tension. Will
hold solid rod points or full size cables
offset from flat or curved mounting
surface. Available in various offset
distances.
| 
| Series 669 Stand-off holder Offset distance 4" standard 2" long wings for attachment LPC669 for copper points or cables LPA669 for aluminum points or cables Series 670 Offset distance 1" standard 6" long wings for attachment LPC670 for copper points or cables LPA670 for aluminum points or cables |
Lightning Protection Strap Type Air Terminal or Cable to Pipe Holder
Copper or Aluminum Strap type air terminal
or cable to pipe holder. Made of heavy
tinned copper or bare aluminum strap
formed to draw tight under bolt tension
to hold solid rod air terminals or full size
cables close to pipe. Available in standard
pipe sizes 1-1/2", 2", 3", and 4".
Other sizes available upon request. | 
|
Lightning Protection Grounding Receptacles
SERIES 680Cast bronze aircraft type static grounding receptacle with standard pin connection and chain retained cover plate. Install flush with finish floor surface. Designed to couple directly to 3/4" section type ground rod or 3/4" extension rod. SERIES 681 Cast bronze aircraft type static grounding receptacle for mounting on a vertical surface. Furnished with standard pin connection, chain retained cover plate and spring clip to secure cover plate when installed on a vertical surface. Install flush with finished wall surface. Designed to couple directly to 3/4" support rod. | Series 680 LPC680 cast bronze aircraft type static grounding receptacle Series 681 LPC681 cast bronze aircraft type static grounding receptacle |
Lightning Protection Grounding Plate
Cast bronze grounding plate for equipment,
machinery, or structure grounding points. May
be installed flush in concrete floor or wall. Face
measures 3-1/4" square with four holes for
1/2" bolts on 1-3/4"center. Cable connection
under bolt tension. For all standard cables.
| 
| Series 682 LPC682 cast bronze grounding plate |
Extension Rod
Copperclad steel extension rod for use
with Part No. LPC680 receptacle. Use
to hold receptacle at proper elevation
for concrete pour. Made of 3/4" rod
24" long with threaded end.
| 
| Series 684 LPCC684 copperclad steel extension rod |
Lightning Protection - Rebar Bonding Assembly
Prefabricated cable to reinforcing
bar bonding assemblies. Catalog
numbered assembly includes 18"
of #4 reinforcing bar with an
exothermic weld to 5 ft. of copper
cable. Wire tie or weld bar to
construction steel before pouring
concrete and route cable tail to
down lead or ground lead location.
| 
| Series 691-693 LPP691 bar with LPC122 copper cable (for Class I systems) LPP692 bar with LPC126 copper cable (for Class II systems) LPP693 bar with LPC137 copper cable (4/0) |
