Offices in Montana, Utah, Florida, California, Texas, Minnesota and North Dakota

Aircraft Static Grounding & Tie down Anchors

Static ground is used for grounding equipment, planes or vehicles. The grounding receptacles come in different sizes and can either be threaded to, or exothermically welded to a ground rod. If you are using a threaded ground rod, you will also need a threaded coupler and driving stud so when you drive the ground rod into the ground. The static grounding receptacles can be installed with just the ground rod or with the helix anchor attachment.

Aircraft tie downs can be used alone or with the helix anchor attachment. Most commonly installed with a depression form (P648), the tie down can be used as an anchor point for planes or static grounding.

To place an order please call 800-370-5886 or fill out this Quote Form.

Aircraft Tie Down Anchor

aircraft tie down anchor

Copperclad Aircraft Tie Down Ground Rods. Different sizes available upon request.

Diameter and LengthCopperclad Steel
3/4" X 10'CC607A

Tie Down Assembly

aircraft tie down assembly

Copper clad sectional ground rod with grounding eyelet. Used for aircraft tie down point also provides a static discharge point.

Diameter and LengthPart Number
5/8" X 8'CC603TD
5/8" X 10'CC604TD
3/4" X 8'CC606TD
3/4" X 10'CC607TD

CC610 Helix Driving Anchor

Helix Driving Anchor

Copper clad helix driving anchor, used with threaded tie down rods. Six inch diameter.

Diameter of Ground RodCopperclad Steel
5/8"C610X58
3/4"C610X34

Tie Down Rod Driver

P629 Tie-down Rod Driver

Used to drive 3/4” tie down anchors (Part number CC607A) without deforming the eyelet.

Part #Description
P629Driving Head for CC607A.

Depression Form

P648 Depression Form underside

3” x 6” x 3” Plastic depression form for pouring concrete around tie down anchor.

Part #Description
P648Depression Form

Aircraft Grounding Eyelet

aircraft grouding eyelet

Aircraft grounding eyelet made of cast brass and threaded so it can be screwed to a sectional ground rod providing a static discharge point for aircraft.

Thread SizeEyelet I.D.Bronze
1/2"1-1/2"C61812
5/8"1-1/2"C61858
3/4"1-1/2"C61834

Threaded Coupler

Threaded Coupling

Copper alloy ground rod coupler used to connect sectional ground rods

Diameter of Ground RodCopperclad SteelStainless Steel
1/2"C611---
5/8"C612S612
3/4"C613S613
1"C614S614

Compression Coupler

Compression Coupler

Threadless ground rod coupler for connecting two pointed ground rods. Coupler openings are tapered at either end so when ground rods are driven they compress inside coupler forming an irreversible connection. Available for copper and stainless steel ground rods.

Diameter of Ground RodCopperclad SteelStainless Steel
1/2"C611CC---
5/8"C612CCS612CC
3/4"C613CCS613CC

Driving Stud

Driving Stud

Steel driving stud used to protect threads on sectional ground rods. Under normal conditions it will drive approximately 20 ground rods before needing replacement.

Thread SizeSteel
9/16"-12S615
5/8"-11S616
3/4"-10S617

Replacement Studs, Inserts and Chains

Replacement Studs, Inserts and Chains

Replacement brass inserts for static grounding receptacles or may be mounted to bus bars. Also available is the replacement chain for static ground cover plate.

Thread SizeTypeMaterialPart Number
3/8"Ball StudBrassC674X38
1/2"Ball StudBrassC674X12
1/2""T" StudBrassC674X12TS
N/AChainBrassC676C

C675 Threaded Static Ground Receptacle

675 Threaded Static Ground Receptacle

Cast brass static ground receptacle, 3" diameter and 3.5" tall, with either a round ball stud or “T” style stud. Cast brass cover cap with brass retention chain. Designed to be coupled with a threaded ground rod up to 1” diameter. Attached one bolt tension cap for fastening ground conductor.

Rod SizeConnectionStud TypePart Number
1/2"ThreadedBall StudC67512
5/8"ThreadedBall StudC67558
3/4"ThreadedBall StudC67534
1/2"Threaded"T" StudC67512TS
5/8"Threaded"T" StudC67558TS
3/4"Threaded"T" StudC67534TS
1/2"Set ScrewBall StudC670512
5/8"Set ScrewBall StudC670558
3/4"Set ScrewBall StudC670534
1/2"Set Screw"T" StudC670512TS
5/8"Set Screw"T" StudC670558TS
3/4"Set Screw"T" StudC670534TS

C676 Threaded Static Ground Receptacle

C676 Threaded Static Ground Receptacle

Cast brass static ground receptacle, 3" diameter and 3.5" tall, with either ball stud or “T” stud. Designed to be coupled with a threaded ground rod up to 1” diameter. Cast brass cover cap with brass retention chain.

Rod SizeConnectionStud TypePart Number
1/2"ThreadedBall StudC67612
5/8"ThreadedBall StudC67658
3/4"ThreadedBall StudC67634
1/2"Threaded"T" StudC67612TS
5/8"Threaded"T" StudC67658TS
3/4"Threaded"T" StudC67634TS
1/2"Set ScrewBall StudC670612
5/8"Set ScrewBall StudC670658
3/4"Set ScrewBall StudC670634
1/2"Set Screw"T" StudC670612TS
5/8"Set Screw"T" StudC670658TS
3/4"Set Screw"T" StudC670634TS

C67734 Diameter Static Grounding Receptacle - Threaded

C678 Static Grounding Receptacle, Exothermic

Cast bronze static grounding receptacle without a cable connection. Standard receptacle is 4-1/2” diameter and 3-1/2” tall.

Rod SizeConnectionStud TypePart Number
1/2"ThreadedBall StudC67712
5/8"ThreadedBall StudC67758
3/4"ThreadedBall StudC67734
1/2"Threaded"T" StudC67712TS
5/8"Threaded"T" StudC67758TS
3/4"Threaded"T" StudC67734TS

C678 Static Grounding Receptacle

C678 Static Grounding Receptacle

Cast brass static ground receptacle with ball stud. Designed to be exothermically welded to either a 5/8” or 3/4” ground rod.